The elevator advertising machine developed by Goodview has superior performance and advanced technology, using cloud services and Internet of Things technology. It also has many advantages. It adopts the annotation API interface, which increases the flexibility of use; it provides standard SAAS services, so it is very convenient to use. It is mainly installed in the elevator and the elevator entrance. Let's share how to install the elevator advertising machine.

Method 1: Fixing with expansion screws

You can use expansion screws to fix the installation back panel to the wall. When the lock is open, hang the installation hook of the elevator advertising machine into the corresponding hook hole on the installation back panel. Make sure that the installation back panel is in a horizontal state. , so that the advertising machine can maintain the level.

Method 2: Glue

Step 1: If screwing is not allowed on the walls of elevators and elevator entrances in some communities, you need to wipe the walls clean, and then use double-sided tape to fix the backboard on the wall, and then tap the center square and four sides. Glass glue, in order to achieve the effect of fixing, when fixing, it must be ensured that the back panel of the elevator advertising machine is kept horizontal.

Step 2: When the glass glue is completely cured, connect the power cord of the elevator advertising machine. If the power cord must be buried in the wall, the power cord will be introduced from the opening of the back panel after the back panel is fixed; if the wall cannot be slotted place, it can be introduced from the openings on the four sides above the backplane.

In summary, the two methods and steps mentioned above are the installation methods of elevator advertising machines shared by Goodview and everyone. Goodview's elevator advertising machine not only has intelligent devices for remote unified equipment management, but also has the industry's advanced information release system, and its technology is far ahead.